Material Math

Deck Board Calculator

The board count is not length × width ÷ board size — the gaps eat a surprising amount. This does the row math.

26 rows 144 in ÷ (5.5 in + 0.125 in)
416 lflinear feet of decking
39 boards458 lf with 10% waste ÷ 12 ft
13 joistsat 16 in on center
6762 per board per joist crossing
$1,040decking + joists, fasteners not priced

    Why the gap matters

    A 12-ft-wide deck is 144 inches. With a 1/8 in gap, each board plus its gap takes 5.625 in of that width — 25.6 boards' worth. So you need 26 rows: 25 full boards plus one ripped board for the last few inches. Round down to 25 and you leave a 3.4 in strip bare. The gap is where drainage and expansion live, so it is not a rounding detail.

    Real board widths are not nominal. A 1×6 is 5.5 in wide, not 6. A 2×6 is also 5.5 in. Deck boards sold as 5/4×6 measure 5.5 in. Ordering against the nominal number is the most common way to come up two boards short.

    Board sizes and what they really measure

    Sold asActual face widthTypical useJoist spacing
    1×43.5 inPorch floors, tight budgets16 in
    1×6 / 5/4×65.5 inThe default deck board16 in
    2×65.5 inHeavy use, wide gaps not wanted24 in
    Composite 5/4×65.5 inLow maintenance, expands in heat12–16 in

    Gap by material

    MaterialGapWhy
    Pressure-treated pine1/8 inShrinks as it dries; a tight deck gaps itself in a month
    Wet / new lumber1/4 inIt will shrink 1/8 in or more — start wide
    Composite3/16 inExpands in heat; 1/8 in closes up in July
    Cedar / hardwood1/8 inStable, but still needs drainage

    Frequently asked

    How many boards for a 12×16 deck?

    39 boards of 12 ft, with 10% waste — 26 rows at 16 ft each is 416 lf, and 12-ft boards do not divide 16 ft evenly, so most rows use two pieces.

    Should boards run the long way or the short way?

    The long way: fewer splices and the joists run the short span. Run them across only if the joists are already framed that way, or if a diagonal layout is worth the extra joists.

    How many screws?

    Two per board per joist crossing — 676 on this deck. A 5-lb box of 2-1/2 in deck screws holds about 350, so two boxes.

    Do I need blocking?

    Yes, wherever two board ends meet over open air. A 2×8 block between joists, 3 in short of the splice, keeps the ends from curling.

    Why does my count disagree with the lumber yard?

    They usually price by linear feet of decking and add 10%, without doing the row math. On small decks that is close. On a 20-ft run it is often two boards off.

    Related