Deck Board Calculator
The board count is not length × width ÷ board size — the gaps eat a surprising amount. This does the row math.
Why the gap matters
A 12-ft-wide deck is 144 inches. With a 1/8 in gap, each board plus its gap takes 5.625 in of that width — 25.6 boards' worth. So you need 26 rows: 25 full boards plus one ripped board for the last few inches. Round down to 25 and you leave a 3.4 in strip bare. The gap is where drainage and expansion live, so it is not a rounding detail.
Real board widths are not nominal. A 1×6 is 5.5 in wide, not 6. A 2×6 is also 5.5 in. Deck boards sold as 5/4×6 measure 5.5 in. Ordering against the nominal number is the most common way to come up two boards short.
Board sizes and what they really measure
| Sold as | Actual face width | Typical use | Joist spacing |
|---|---|---|---|
| 1×4 | 3.5 in | Porch floors, tight budgets | 16 in |
| 1×6 / 5/4×6 | 5.5 in | The default deck board | 16 in |
| 2×6 | 5.5 in | Heavy use, wide gaps not wanted | 24 in |
| Composite 5/4×6 | 5.5 in | Low maintenance, expands in heat | 12–16 in |
Gap by material
| Material | Gap | Why |
|---|---|---|
| Pressure-treated pine | 1/8 in | Shrinks as it dries; a tight deck gaps itself in a month |
| Wet / new lumber | 1/4 in | It will shrink 1/8 in or more — start wide |
| Composite | 3/16 in | Expands in heat; 1/8 in closes up in July |
| Cedar / hardwood | 1/8 in | Stable, but still needs drainage |
Frequently asked
How many boards for a 12×16 deck?
39 boards of 12 ft, with 10% waste — 26 rows at 16 ft each is 416 lf, and 12-ft boards do not divide 16 ft evenly, so most rows use two pieces.
Should boards run the long way or the short way?
The long way: fewer splices and the joists run the short span. Run them across only if the joists are already framed that way, or if a diagonal layout is worth the extra joists.
How many screws?
Two per board per joist crossing — 676 on this deck. A 5-lb box of 2-1/2 in deck screws holds about 350, so two boxes.
Do I need blocking?
Yes, wherever two board ends meet over open air. A 2×8 block between joists, 3 in short of the splice, keeps the ends from curling.
Why does my count disagree with the lumber yard?
They usually price by linear feet of decking and add 10%, without doing the row math. On small decks that is close. On a 20-ft run it is often two boards off.
Related
- Concrete Calculator — footings for the posts
- Fence Calculator — posts, rails and pickets
- Paint Calculator — staining the railing