Material Math

Tile Calculator

Boxes of tile, bags of thinset, bags of grout — with the waste factor your layout actually needs.

14boxes

144 sq ft + 10% = 158.4 sq ft of tile.

Floor area
144.00 sq ft
Tile to buy
158.40 sq ft
Thinset (50 lb)
3 bags
Grout (25 lb)
1 bag

Tile cost: $630

How the math works

Floor area is length times width. Add the cut allowance, divide by what one box covers, round up — you cannot buy a third of a box.

For a 12 × 12 ft room with 12 × 12 tile:

How much waste your layout needs

LayoutCut allowance
Straight lay, square room10%
Diagonal or herringbone15%
Many corners, toilet flange, small room15–20%
Large-format 24 × 2415% — a broken corner wastes a $40 tile

Keep one full box. Dye lots change, and a repair in three years needs matching tile from the same lot.

Thinset, by trowel size

TileTrowelOne 50 lb bag covers
Mosaic3/16 in V-notch90–100 sq ft
Up to 8 in1/4 in square80–95 sq ft
8–16 in3/8 in square60–75 sq ft
Over 16 in1/2 in square40–50 sq ft

A bigger tile needs a deeper notch, and a deeper notch eats mortar fast. This is why a 24 × 24 floor uses twice the thinset of the same area in 12 × 12. A 12 × 12 tile sits right on the line — some charts keep it on a 1/4 in trowel, most manufacturers call for 3/8 in. This calculator uses the 3/8 in figure, about 70 sq ft per bag, because running short mid-row is the expensive mistake.

Grout, by tile size

Tile (1/8 in joint)One 25 lb bag covers
1 × 1 mosaic50 sq ft
2 × 2 mosaic100 sq ft
6 × 6300 sq ft
12 × 12380 sq ft

Halve that for 1/4 in joints. Small tile and wide joints is where grout bills come from — a mosaic shower wall can use more grout than a whole 200 sq ft floor.

Questions people actually ask

How many boxes for a 12×12 room?

144 sq ft, plus 10% = 158.4 sq ft. At 12 sq ft a box, 14 boxes. Check the box — some 12 × 12 lines are 10.6 sq ft, which would make it 15.

Should I buy 10% or 15% extra?

10% if the room is square and you are laying straight. 15% for diagonal. Any room with a toilet, a doorway jog or a chimney breast is worth 15% regardless of layout.

Do I need cement board?

Over plywood, yes — cement board or an uncoupling membrane. Tile does not flex and subfloor does; the membrane is what stops the tile taking the movement.

Can I tile over old tile?

Sometimes, with a bonding primer and a flat existing surface, and it raises the floor by the tile thickness. Two layers of tile usually fail at the door threshold, not in the middle of the floor.

How flat does the floor have to be?

1/8 inch in 10 feet. Flat, not level. A floor can slope an inch across a room and still be perfect for tile; a 1/4 inch hump in the middle will rock every large tile you lay.