Material Math

Drywall Calculator

Enter the room, and get sheets, mud, tape, screws and corner bead — measured the way a hanger measures, not the way a wall measures.

477 sq ft walls 384 + ceiling 144 − openings 51
17 sheets525 sq ft with 10% waste ÷ 32 sq ft
1 box4.0 gal at 3 coats (4.5 gal per box covers about 550 sq ft)
1 roll176 lf
2 lbabout 1 screw per sq ft
4 pieces8-ft bead, four corners
$347sheets, mud, tape, screws, bead

    What the numbers actually mean

    Wall area is 2 × (length + width) × height — every room has two of each wall. The ceiling adds length × width. Then openings come off: a standard door is about 21 sq ft, a window about 15. That 477 sq ft for a 12×12 room with an 8-ft ceiling is the number a supplier quotes against.

    Waste is where most first-time estimates fail. A plain rectangular room wastes about 10%. Add a closet, an angled wall, or a soffit and you are at 15%. A basement with ducts and bulkheads runs 20%.

    Mud is sized for three coats, which is what a Level 4 finish (paint-ready) needs: roughly 1 gallon of ready-mix per 120 sq ft of board. A 4.5-gallon box therefore finishes about 550 sq ft — the number National Gypsum prints on the pail.

    Panel size: what fits in your car?

    PanelSquare feetSheets per 100 sq ftGetting it home
    4 × 8 ft324Fits a pickup bed; the default for walls
    4 × 10 ft403Ends at 10 ft — fewer horizontal joints in tall rooms
    4 × 12 ft483Needs a trailer or delivery; fewer butt joints, harder to hang alone

    Longer panels mean fewer joints, and joints are where the labor goes. If you can get 12-ft panels delivered, an 8-ft ceiling still needs only one horizontal joint per course.

    Mud, tape and screws by the numbers

    MaterialRule of thumbWhat one unit buys
    Joint compound1 gal per 120 sq ft, 3 coats4.5-gal box ≈ 550 sq ft
    Paper tape0.37 lf per sq ft500-ft roll ≈ 1,350 sq ft
    Screws (1-1/4")1 per sq ft, 32 per 4×8 sheet1 lb ≈ 265 screws
    Corner bead8-ft pieces, one per outside corner4 pieces cover an 8-ft room

    Thickness: 1/2 in or 5/8 in?

    ThicknessWhere it belongsWhy
    3/8 inPatches, curved wallsBends easily; too flimsy for a full wall
    1/2 inWalls at 16 in on centerThe standard wall board; cheapest per sq ft
    5/8 inCeilings, fire-rated wallsSags less over time and buys a one-hour rating on many assemblies

    If the ceiling is included in the count above, budget for 5/8 in there. It costs about 25% more per sheet and saves you a sagging ceiling in five years.

    Frequently asked

    How many sheets for a 12×12 room with 8-ft ceilings?

    With the ceiling and a door and two windows: 17 sheets of 4×8. Walls are 384 sq ft, the ceiling 144, openings take 51 off, and 10% waste brings it to about 525 sq ft.

    Do I deduct doors and windows?

    Deduct anything larger than about 4 sq ft — a standard door and window both qualify. Keep small openings, because the offcuts around them rarely get reused.

    How much mud per sheet?

    About 0.27 gallons per 4×8 sheet for three coats, so roughly four sheets per gallon. A 4.5-gallon box covers about 16–17 sheets.

    Can I hang drywall over an existing wall?

    Yes, as a re-skin, if the old surface is flat and you use longer screws. Add the extra thickness to door jambs and outlet boxes — that is the part people forget.

    What is a Level 4 finish?

    Three coats of mud over taped joints, feathered out about 10 in each side. It is the standard for painted walls in homes. Level 5 adds a skim coat over the whole surface, for walls under harsh light.

    Related