Drywall Calculator
Enter the room, and get sheets, mud, tape, screws and corner bead — measured the way a hanger measures, not the way a wall measures.
What the numbers actually mean
Wall area is 2 × (length + width) × height — every room has two of each wall. The ceiling adds length × width. Then openings come off: a standard door is about 21 sq ft, a window about 15. That 477 sq ft for a 12×12 room with an 8-ft ceiling is the number a supplier quotes against.
Waste is where most first-time estimates fail. A plain rectangular room wastes about 10%. Add a closet, an angled wall, or a soffit and you are at 15%. A basement with ducts and bulkheads runs 20%.
Mud is sized for three coats, which is what a Level 4 finish (paint-ready) needs: roughly 1 gallon of ready-mix per 120 sq ft of board. A 4.5-gallon box therefore finishes about 550 sq ft — the number National Gypsum prints on the pail.
Panel size: what fits in your car?
| Panel | Square feet | Sheets per 100 sq ft | Getting it home |
|---|---|---|---|
| 4 × 8 ft | 32 | 4 | Fits a pickup bed; the default for walls |
| 4 × 10 ft | 40 | 3 | Ends at 10 ft — fewer horizontal joints in tall rooms |
| 4 × 12 ft | 48 | 3 | Needs a trailer or delivery; fewer butt joints, harder to hang alone |
Longer panels mean fewer joints, and joints are where the labor goes. If you can get 12-ft panels delivered, an 8-ft ceiling still needs only one horizontal joint per course.
Mud, tape and screws by the numbers
| Material | Rule of thumb | What one unit buys |
|---|---|---|
| Joint compound | 1 gal per 120 sq ft, 3 coats | 4.5-gal box ≈ 550 sq ft |
| Paper tape | 0.37 lf per sq ft | 500-ft roll ≈ 1,350 sq ft |
| Screws (1-1/4") | 1 per sq ft, 32 per 4×8 sheet | 1 lb ≈ 265 screws |
| Corner bead | 8-ft pieces, one per outside corner | 4 pieces cover an 8-ft room |
Thickness: 1/2 in or 5/8 in?
| Thickness | Where it belongs | Why |
|---|---|---|
| 3/8 in | Patches, curved walls | Bends easily; too flimsy for a full wall |
| 1/2 in | Walls at 16 in on center | The standard wall board; cheapest per sq ft |
| 5/8 in | Ceilings, fire-rated walls | Sags less over time and buys a one-hour rating on many assemblies |
If the ceiling is included in the count above, budget for 5/8 in there. It costs about 25% more per sheet and saves you a sagging ceiling in five years.
Frequently asked
How many sheets for a 12×12 room with 8-ft ceilings?
With the ceiling and a door and two windows: 17 sheets of 4×8. Walls are 384 sq ft, the ceiling 144, openings take 51 off, and 10% waste brings it to about 525 sq ft.
Do I deduct doors and windows?
Deduct anything larger than about 4 sq ft — a standard door and window both qualify. Keep small openings, because the offcuts around them rarely get reused.
How much mud per sheet?
About 0.27 gallons per 4×8 sheet for three coats, so roughly four sheets per gallon. A 4.5-gallon box covers about 16–17 sheets.
Can I hang drywall over an existing wall?
Yes, as a re-skin, if the old surface is flat and you use longer screws. Add the extra thickness to door jambs and outlet boxes — that is the part people forget.
What is a Level 4 finish?
Three coats of mud over taped joints, feathered out about 10 in each side. It is the standard for painted walls in homes. Level 5 adds a skim coat over the whole surface, for walls under harsh light.
Related
- Paint Calculator — how much paint for those new walls
- Concrete Calculator — slabs and footings
- Tile Calculator — boxes, thinset, grout