Material Math

Roofing Calculator

A roof is bigger than the house under it. Enter the footprint and the pitch, and get squares, bundles, underlayment and nails.

930 sq ft 832 sq ft × 1.118 slope factor
9.3roofing squares (100 sq ft each)
31 bundles10.2 squares with 10% waste × 3 per square
3 rolls30-lb felt, 400 sq ft per roll
11 lbabout 1 lb per square — roughly 320 nails
$1,390shingles, felt and nails

    Why the roof is bigger than the house

    A roof sits at an angle, so its surface is longer than the floor below it. The ratio is the slope factor: the square root of 1 plus the rise over run squared. At 6/12 that works out to 1.118 — a 832 sq ft footprint is a 930 sq ft roof, and that 12% is the difference between ordering right and ordering short.

    The formula used above is simple: (length + 2 × overhang) × (width + 2 × overhang) × slope factor. Overhangs matter more than people expect — 1 ft of overhang on every side of a 24 × 30 ft house adds about 16% to the roof area.

    Slope factor by pitch

    PitchAngleSlope factor1,000 sq ft footprint becomes
    3/1214°1.0311,031 sq ft
    4/1218°1.0541,054 sq ft
    5/1223°1.0831,083 sq ft
    6/1227°1.1181,118 sq ft
    8/1234°1.2021,202 sq ft
    10/1240°1.3021,302 sq ft
    12/1245°1.4141,414 sq ft

    Bundles, squares and what they cost

    Shingles are sold by the bundle, and most asphalt shingles — 3-tab and architectural alike — cover one square (100 sq ft of roof) in three bundles. GAF's own guide says three bundles per square for both types; a few architectural lines are packed four to the square, and the wrapper always states the coverage. Pick the number on the bundle you plan to buy, because the same roof can jump by a third on weight and bundles.

    ItemRule of thumbWatch out for
    3-tab shingles3 bundles per square20–25 year rated; tears in high wind
    Architectural3 per square on most lines; 4 on some30–50 year rated; heavier, slower to nail
    30-lb felt400 sq ft per rollNeeds a cap nail every 12 in
    Synthetic felt1,000 sq ft per rollAbout twice the price, a third of the time
    Roofing nails320 per square1-1/4 in for 3-tab, 1-1/2 in for architectural

    Frequently asked

    How many bundles for a 1,000 sq ft roof?

    That is 10 squares: 30 bundles of a 3-per-square shingle, or 40 if the line you picked is packed four to the square. Add 10% waste and round up — 33, or 44 on the heavy line.

    How do I measure the roof without climbing it?

    Measure the footprint at the ground, add the overhangs, then multiply by the slope factor for your pitch. It is accurate to within a bundle on a simple gable.

    When is a roof too steep to walk?

    Above 6/12 most crews want roof jacks; above 8/12 a harness is required by OSHA in the US. That is also where labor prices jump.

    Do I need ice-and-water shield?

    In cold climates, yes — at least the first 3 ft from the eave, doubled at valleys. It is sold by the roll and covers 2 squares per roll.

    How long does a tear-off take?

    One layer of 3-tab on a 20-square roof is about two days for a two-person crew. A second layer doubles it, and that is before disposal fees.

    Related