Roofing Calculator
A roof is bigger than the house under it. Enter the footprint and the pitch, and get squares, bundles, underlayment and nails.
Why the roof is bigger than the house
A roof sits at an angle, so its surface is longer than the floor below it. The ratio is the slope factor: the square root of 1 plus the rise over run squared. At 6/12 that works out to 1.118 — a 832 sq ft footprint is a 930 sq ft roof, and that 12% is the difference between ordering right and ordering short.
The formula used above is simple: (length + 2 × overhang) × (width + 2 × overhang) × slope factor. Overhangs matter more than people expect — 1 ft of overhang on every side of a 24 × 30 ft house adds about 16% to the roof area.
Slope factor by pitch
| Pitch | Angle | Slope factor | 1,000 sq ft footprint becomes |
|---|---|---|---|
| 3/12 | 14° | 1.031 | 1,031 sq ft |
| 4/12 | 18° | 1.054 | 1,054 sq ft |
| 5/12 | 23° | 1.083 | 1,083 sq ft |
| 6/12 | 27° | 1.118 | 1,118 sq ft |
| 8/12 | 34° | 1.202 | 1,202 sq ft |
| 10/12 | 40° | 1.302 | 1,302 sq ft |
| 12/12 | 45° | 1.414 | 1,414 sq ft |
Bundles, squares and what they cost
Shingles are sold by the bundle, and most asphalt shingles — 3-tab and architectural alike — cover one square (100 sq ft of roof) in three bundles. GAF's own guide says three bundles per square for both types; a few architectural lines are packed four to the square, and the wrapper always states the coverage. Pick the number on the bundle you plan to buy, because the same roof can jump by a third on weight and bundles.
| Item | Rule of thumb | Watch out for |
|---|---|---|
| 3-tab shingles | 3 bundles per square | 20–25 year rated; tears in high wind |
| Architectural | 3 per square on most lines; 4 on some | 30–50 year rated; heavier, slower to nail |
| 30-lb felt | 400 sq ft per roll | Needs a cap nail every 12 in |
| Synthetic felt | 1,000 sq ft per roll | About twice the price, a third of the time |
| Roofing nails | 320 per square | 1-1/4 in for 3-tab, 1-1/2 in for architectural |
Frequently asked
How many bundles for a 1,000 sq ft roof?
That is 10 squares: 30 bundles of a 3-per-square shingle, or 40 if the line you picked is packed four to the square. Add 10% waste and round up — 33, or 44 on the heavy line.
How do I measure the roof without climbing it?
Measure the footprint at the ground, add the overhangs, then multiply by the slope factor for your pitch. It is accurate to within a bundle on a simple gable.
When is a roof too steep to walk?
Above 6/12 most crews want roof jacks; above 8/12 a harness is required by OSHA in the US. That is also where labor prices jump.
Do I need ice-and-water shield?
In cold climates, yes — at least the first 3 ft from the eave, doubled at valleys. It is sold by the roll and covers 2 squares per roll.
How long does a tear-off take?
One layer of 3-tab on a 20-square roof is about two days for a two-person crew. A second layer doubles it, and that is before disposal fees.
Related
- Drywall Calculator — ceiling repairs after the roof
- Concrete Calculator — footings for a porch or addition
- Paint Calculator — gable ends and fascia